Luosjiet online store
Engineer Boot EG02 - luosjiet®boots MTO - TeaCore (Hand Dyed) Oiled Nubuck(German)
Engineer Boot EG02 - luosjiet®boots MTO - TeaCore (Hand Dyed) Oiled Nubuck(German)
MADE TO ORDER — ESTIMATED DISPATCH IN 4 WEEKS
YOUR BOOTS, YOUR CHOICE
Explore the factory-approved leather, sole, and construction options available for this boot. All configurations are subject to technical compatibility and production approval.
Không thể tải khả năng nhận hàng tại cửa hàng
Made to Order footwear is not eligible for LUOSJIET's voluntary return or size exchange services, including Size Exchange Protection.
Please confirm your size, width, leather, and specifications before ordering. Mandatory consumer rights remain unaffected.
Product Details
Product Details
Upper: Brown Hand-Dyed TeaCore Oiled Nubuck (German)
Last: Boondocker No.3 Last (Almond Toe)
Lining: Unlined Shaft + Calfskin-Lined Vamp
Toe Structure: Unstructured Toe (No Toe Stiffener)
Height: Approx. 10 inches
Construction: 270° Goodyear Welted Construction
Welt: Flat Welt
Buckles: Brass Buckles
Insole: 4mm Leather Insole (Non-removable)
Filling: Premium Thai Natural Latex
Shank: Steel Shank
Heel Counter: Leather Counter
Outsole: Leather Sole + Dr. Sole #1140 SuperGrip II Half Sole
Heel: 5-Layer Leather Heel Stack + Dr. Sole #1230 SuperGrip Half Heel
Design Details
Design Details
A refined engineer boot silhouette, distinguished by elegant proportions and clean, flowing lines.
Hand-dyed brown nubuck with rich tonal depth and a naturally evolving TeaCore patina.
A sculpted almond-shaped toe lends a sleek, elongated profile to the traditional engineer boot.
Solid brass buckles introduce a subtle contrast against the warm brown leather.
An unlined shaft allows the leather to develop a natural, relaxed character over time.
A substantial layered leather heel adds architectural depth and a sense of quiet strength.
Made to order, with an emphasis on material authenticity, thoughtful proportions, and timeless elegance.
Last & Fit
Last & Fit
BOONDOCKER NO.3 LAST
Almond-Shaped Toe · Refined Silhouette
Built on the LUOSJIET Boondocker No.3 Last, featuring a distinctive almond-shaped toe and a sleek, elongated profile.
The last creates a refined silhouette while preserving the classic proportions of a traditional engineer boot.
For sizing, please refer to our Size Guide and Cross-Brand Size Conversion Chart, using your best-fitting boots as a reference.
For personalized sizing assistance, our Find Your Last service can help you evaluate your foot measurements and fit history before ordering.
As this is a Made-to-Order product, we recommend carefully confirming your size and width before purchase. MTO products are not eligible for voluntary returns or size exchanges.
All sizing recommendations are for reference only. Actual fit may vary depending on foot shape, instep volume, sock thickness, and personal fit preferences.
Shipping & Returns
Shipping & Returns
SHIPPING & DELIVERY
Made to Order: Estimated dispatch approximately 4 weeks after payment confirmation.
International Delivery: Typically 7–15 business days after dispatch. Production and delivery times are separate. Delivery dates are not guaranteed.
Free Shipping: Available on qualifying orders with a discounted merchandise subtotal of US$200 or more.
Standard Shipping Fee: US$80 for orders with a discounted merchandise subtotal below US$200.
Import Duties & Taxes: Covered by LUOSJIET for supported destinations.
DELIVERY & SIGNATURE SERVICE
Standard international shipping does not include signature-required delivery.
Depending on the destination and local carrier arrangements, packages may be delivered without an in-person signature or require collection from a designated pickup location.
If you require an in-person signature, please purchase our optional Signature Required Delivery Service separately when placing your order.
This service is subject to availability and local carrier procedures. Purchasing this service does not guarantee delivery directly to your door.
RETURNS & SIZE EXCHANGES
Made to Order footwear is excluded from LUOSJIET's voluntary return and size exchange services, including:
Standard Voluntary Return — US$99.90
Post-Purchase Size Exchange — US$59.90
Pre-Purchase Size Exchange Protection — US$39.90
Please carefully confirm your size, width, leather, and other specifications before ordering.
These voluntary service exclusions do not affect mandatory consumer rights, including applicable statutory withdrawal rights and remedies for defective, damaged, misdescribed, incorrectly supplied, or undelivered products.
The classification of a product as Made to Order does not automatically remove statutory withdrawal rights where applicable.
Please review our complete Shipping Policy and Returns, Exchanges & Cancellations Policy for further details.
MTO ENGINEER BOOT EG02
Brown Hand-Dyed TeaCore Oiled Nubuck (German)
A refined interpretation of the classic Engineer Boot, defined by elegant proportions, exceptional materials, and understated craftsmanship.
Crafted from German Hand-Dyed TeaCore Oiled Nubuck, the rich brown leather reveals subtle variations in tone and texture. With wear, its underlying tea-colored core gradually emerges, developing a distinctive patina unique to each pair.
Built on the Boondocker No.3 Last, the sculpted almond-shaped toe creates a sleek, elongated silhouette, lending a more refined character to the traditional engineer boot.
Solid brass buckles, an unlined shaft, and a substantial layered leather heel complete the design with quiet confidence.
Made to order, each pair reflects a considered balance of heritage, craftsmanship, and enduring elegance.
Crafted to Order. Made to Endure.
Share
LUOSJIET
PRE-SHIPMENT PHOTO CONFIRMATION
Share

Luosjiet Membership Store
Express delivery face-to-face signing service
Share

Fine products made with the spirit of craftsmanship
Luosjiet is a high-end Goodyearwelted Constrution shoes manufacturer from China. From material selection to manufacturing technology, we are meticulous.
Select global high-quality raw material brands all over the world.
While upholding the craftsmanship, whether it is leather, sewing thread, even the chemical materials required for making shoes are made of high-quality raw material brands in the industry.Adhere to the concept of quality life from the source.
Show the beauty of manufacturing technology
From the fine sewing of the upper to the precise construction of the internal structure of the boots, the Luosjiet team works closely together to present perfect products with ingenuity.
Detailed presentation
Details determine success or failure, and the craftsmen of Luosjiet must strictly control every production process.